€ EUR
KSh KES
Description
Characteristics
- For common angle grinders (e.g. from Parkside, Bosch, Einhell, Makita, Metabo, Black&Decker)
- diamond cutting disc set
- High cutting performance with long service life
- cutting disc set for wet and dry cutting
- Contents, 4 pieces
- 1x full-rim disc for wet cutting of ceramics, tiles, marble slabs, thin granite and similar materials
- 1x segment disc for dry cutting of concrete, roof tiles, clinker bricks and similar materials
- 2x turbo discs for universal wet/dry cutting
- pot brush
- Ideal for removing rust, varnish or paint from metal
- Braided brush for powerful processing of metal surfaces
- metal cutting disc set
- For machining thin-walled metal profiles and pipes
- 11x cutting discs for metal
- Extra thin
- Flat shape
- resin-bonded
- cutting/grinding disc set
- For building materials made of metal or stone such as pipes, profiles, tiles or panels
- resin-bonded
- Contents, 11 pieces
- 5x metal cutting discs, flat
- 5x stone cutting discs, flat
- 1x grinding disc for metal, cranked
Technical data
- Diamond cutting disc set:
- Disc diameter: Ø 125 mm
- Thickness of the blade: 1.2 mm
- Speed: max 12,250 min-¹
- Speed: max. 80 m/s
- pot brush:
- Diameter: Ø 75 mm
- Speed: max. 12,500 min-¹
- Thread: M14
- Metal cutting disc set:
- Disc diameter: Ø 125 mm
- Speed: max. 12,250 min-¹
- Speed: max. 80 m/s
- Bore: Ø 22.23 mm
- Cutting/grinding disc set:
- Disc diameter: Ø 125 mm
- Speed: max. 12,250 min-¹
- Speed: max. 80 m/s
- Bore: Ø 22.23 mm
material
steel, plastic
Mass
- Diamond cutting disc set: each approx. Ø 125 mm
- Cup brush: approx. Ø 75 mm
- Metal cutting disc set: each approx. Ø 125 x H 1.2 mm
- Cutting/grinding disc set:
- Metal cutting discs: each approx. Ø 125 x H 1.2 mm
- Stone cutting discs: each approx. Ø 125 x H 1.2 mm
- Grinding disc for metal: approx. Ø 125 x H 6 mm
Weight
- Diamond cutting disc set: approx. 460 g
- Cup brush: approx. 260 g
- Metal cutting disc set: approx. 323 g
- Cutting/grinding disc set: approx. 447 g
notes
Diamond cutting disc set: For cutting only! Not for roughing! After 60-80 seconds of cutting time, run the disc idle for 10 seconds.
Cutting/roughing disc set: Grinding tools may only be mounted by qualified personnel.
